Toshiba MMC-AP0188HPUL Service Manual page 21

No. Item
6 Air speed 1) Operation with (HH), (H), (L) or [AUTO] mode is carried
selection
2) When the air speed mode [AUTO] is selected, the air
<COOL>
Ta ( °F)
+5.4
+4.5
+3.6
+2.7
+1.8
+0.9
Tsc
–0.9
Controlling operation in case when thermo of remote
controller works is same as a case when thermo of
the body works.
If the air speed has been changed once, it is not
changed for 3 minutes. However when the air volume
is exchanged, the air speed changes.
When cooling operation has started, select a down-
ward slope for the air speed, that is, the high position.
If the temperature is just on the difference boundary,
the air speed does not change.
<HEAT>
(–0.9) –1.8
(+0.9) +1.8
(+1.8) +3.6
(+2.7) +5.4
(+3.6) +7.2
Value in the parentheses indicates one when thermostat
of the remote controller works.
Value without parentheses indicates one when thermo-
stat of the body works.
If the air speed has been changed once, it is not
changed for 1 minute. However when the air speed
exchanged, the air speed changes.
When heating operation has started, select an upward
slope for the air speed, that is, the high position.
If the temperature is just on the difference boundary,
the air speed does not change.
Outline of specifications
out by the command from the remote controller.
speed varies by the difference between Ta and Ts.
Ta ( °C)
+3.0
HH
+2.5
<HH>
+2.0
H+ <HH>
+1.5
H <HH>
+1.0
L+ <H+>
+0.5
L <H>
Tsc
L <H>
–0.5
L <L+>
< > : Indicate automatic cooling.
Ta (°F) Ta (°C)
L <L+>
(–0.5) –1.0
L+ <H>
(0) Tsh (0) Tsh
H <H+>
(+0.5) +1.0
H+
<HH>
(+1.0) +2.0
HH
(+1.5) +3.0
<HH>
(+2.0) +4.0
< > : Indicate automatic heating.
Body thermostat works.
Remote controller thermostat works.
A
B
C
D
E
F
G
E
D
C
B
A
- 21 -
Remarks
HH > H+ > H > L+ > L > UL
Code No. 32
0000: Body thermo. (Main unit)
0001: Remote controller
thermo.