Installation And Commissioning - Lincat Silverlink SLI21 Installation, Operating And Servicing Instructions

Table of Contents

Advertisement

INSTALLATION AND COMMISSIONING

This appliance must be earthed.
If replacing the plug connect the terminals as follows:
Green and Yellow wire
Blue wire
Brown wire
Supply cords shall be oil resistant, sheathed flexible cable not lighter than ordinary
polychloroprene or equivalent elastomer sheathed cord (code 60245 IEC 57)
The SLI21, SLI3 and SLI3W appliances have a single supply cord.
The SLI42 appliance has two supply cords.
Ventilation and air circulation:
Install this appliance on a level surface ensuring that all vents are unobstructed.
Any partitions, walls or furniture must be of non-combustible material.
Minimum distances A=100mm, B=1000mm – see image below:
IS 564 ECN 3766
Earth
Neutral
Live
A
Page 5 of 13
E
N
L
B
A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Silverlink sli3Silverlink sli42Silverlink sli3w

Table of Contents