Table of Contents
Advertisement
Quick Links
Installation, Operating and Servicing
Instructions
Twin Zone Induction Hob
IH21
Please make a note of your product details for
future use:
Date Purchased:_________________________
Model Number:__________________________
Serial Number:__________________________
Dealer:_________________________________
_______________________________________
IS 519 ECN 3681
Page 1 of 12
Advertisement
Table of Contents
Related Manuals for Lincat DK977
Summary of Contents for Lincat DK977
- Page 1 Installation, Operating and Servicing Instructions Twin Zone Induction Hob IH21 Please make a note of your product details for future use: Date Purchased:_________________________ Model Number:__________________________ Serial Number:__________________________ Dealer:_________________________________ _______________________________________ IS 519 ECN 3681 Page 1 of 12...
-
Page 2: Table Of Contents
WARNING! This symbol is used whenever there is a risk of personal injury. CAUTION! This symbol is used whenever there is a risk of damaging your Lincat product. NOTE: This symbol is used to provide additional information, hints and tips. -
Page 3: Warnings And Precautions
WARNINGS AND PRECAUTIONS This appliance must be installed, commissioned and serviced by a qualified person in accordance with national and local regulations in force in the country of installation. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person. - Page 4 Supply cords shall be oil resistant, sheathed flexible cable not lighter than ordinary polychloroprene or equivalent elastomer sheathed cord (code 60245 IEC 57) Install this appliance on a level surface ensuring all vents are unobstructed. Any partitions, walls or furniture must be of non-combustible material. Minimum distances A 100mm B 1000mm –...
-
Page 5: Operating Instructions
Power Ratings Model Amps Supply IH21 13.0 230V/1ph/50Hz Heat input rear zone, normal Heat input rear zone, boost 13.0 Heat input front zone, normal Heat input front zone, boost Max total heat input cannot exceed 3kW OPERATING INSTRUCTIONS Only qualified or trained personnel should use this appliance. Do not place metal objects, aluminium foil and plastic vessels on the ceramic surface, and do not use the surface for storage. - Page 6 It is normal for induction generators to make buzzing, whistling and clicking noises, especially on lower power settings. If the ceramic glass surface is cracked, immediately disconnect the appliance from the supply. Connect to the mains supply and switch on via the On/Off switch located on the base of the appliance (see Fig 4).
- Page 7 The following symbols are observed through the ceramic glass: Low temperature hold Power level setting (1-9) Power boost function Automatic heat up control Control lock function Pan detection (no pan present) Residual heat display Error codes - generator Error – rotary control (lightning symbol) Fig 3 Low temperature hold The pan base temperature is monitored through the hobtop, allowing dishes to be kept...
- Page 8 Power level settings 9 power level settings are available. The table gives the percentage of maximum power for each setting with the time limit for operation at that power. Power level Low temp hold % of power 15% 19% 31% 45% 64% 100% Time limit (mins) Power boost function Power boost is activated by turning the control clockwise from level 9.
-
Page 9: Cleaning
There are numerous ‘E’ symbol error codes identifying issues within the system which are primarily of use when reporting a fault to the Service Department at Lincat. Some errors can be cleared by turning the control off, or completely turning off and unplugging the appliance before reconnecting. -
Page 10: Fault Finding
Cool the appliance and disconnect from supply. Turn the hob on its back or side without scratching the cooking surface. Push the slide latch (Fig 4) and lift the filter cover away from the base. Replace the used filter with a new one. Reverse the procedure to re-fit the cover. Do not operate the appliance without a filter, as dirt and grease could be drawn into the electronics, impairing safe operation. -
Page 11: Spare Parts List
Filter pad KN251 Control knob NE43 Neon S/R0181 Cooling fan SW89 On/Off switch SERVICE INFORMATION For help with the installation, maintenance and use of your Lincat equipment, please contact our service department: IS 519 ECN 3681 Page 11 of 12... - Page 12 All available on serial plate Type number • Serial number Lincat reserve the right to carry out any work under warranty, given reasonable access to the appliance, during normal working hours, Monday to Friday, 08:30 to 17:00. GUARANTEE This unit carries a comprehensive UK mainland 2 year warranty. The guarantee is in addition to, and does not diminish your statutory or legal rights.