Installation; General Use - Lincat IH21 User And Installation Instructions Manual

IMPORTANT
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THE EQUIPMENT. KEEP
THEM IN A SAFE PLACE FOR FUTURE REFERENCE.
All Lincat electrical appliances must be installed, operated and serviced by a competent person. Users
should take care to adopt safe working practices when operating or cleaning appliances. Please contact
your local distributor for further advice.
WARNING
APPLIANCES MUST BE EARTHED.
ISOLATE THE POWER SUPPLY BEFORE CARRYING OUT ANY INSTALLATION OR
MAINTENANCE WORK.
PARTS OF APPLIANCES BECOME HOT DURING NORMAL USE, TAKE CARE TO AVOID
ACCIDENTAL BURNS.
IF THE CERAMIC GLASS SURFACE IS CRACKED, IMMEDIATELY DISCONNECT THE APPLIANCE
FROM THE SUPPLY.
CAUTION SYMBOL: Non-ionising electromagnetic radiation (magnetic field).
WARNING SYMBOL: Dangerous voltage (live parts at a working voltage exceeding 250v).

INSTALLATION

1. Ensure that the electricity supply is adequate for the equipment being installed.
2. Partitions, walls, kitchen furniture and other materials less than 100mm from the appliance
should be made from non-combustible material.
3. Remove all protective plastic coating from the unit.
4. When siting the equipment, make sure that it is level and that there is a free flow of cool air
around the unit and that vents are not blocked.
5. All appliances with an electric load of 3kW and below are fitted with a BS1363 fused plug and
should be connected to an earthed socket.
6. Appliances must be installed in accordance with: Health & Safety at Work Act, IEE Wiring
Regulations, BS Codes of Practice, Local and National Building Regulations and Fire
Precautions Act 1971.
7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.

GENERAL USE

1. The following convention applies where indicator lights are fitted to appliances:-
Green on - power to the unit.
2. When the IH21 Induction hob is plugged into the 13amp mains supply and switched on, the
green neon light will illuminate and the cooling fan will be heard running.
3. After use, switch the hob zone off by means of its control. Do not rely on the pan detector.
4. Aluminium foil and plastic vessels are not to be placed on hot glass ceramic surfaces. Do not
use these surfaces for storage.
5. Metallic objects should not be placed on the hob surface within the cooking zones since they
could get hot. Take care when operating the appliance as rings, watches and similar objects
could get hot when in close proximity to the hob surface.
6. Only use pans of the type and size recommended, refer to 'pan selection' notes.
7. Users with heart pacemakers should consult with the manufacturer of the pacemaker or their
doctor.
IS429:ECN3369