Pontiac 1996 Grand Am Owner's Manual page 88

Turn and Lane Change Signals
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a %urn, move the lever all the way up or down.
When the turn is
finished, the lever will return
automatically.
Q
A green
arrow on
the
instrument panel will flash
in the
direction
of
the turn
or lane change.
To signal a lane change; just raise or lower the lever
until the mow starts to
flash. Hold
it
there until you
complete your lane change. The lever will return by
itself when you release it.
As you signal a
turn
or a lane change, if the arrows flash
at twice the normal rate, a signal bulb may be burned
out.
If a bulb is burned,out, replace it to help avoid
an
accident. If the arrows don't go on
at
all when you
signal a turn, check for burned-out bulbs and then check
the fuse (see "Fuses and Circuit Breakers" in the Index).
Headlamp High/Low Beam
To change the headlamps
from low bearn to high or
high to low, pull the turn
signal lever all
the
way
toward you. Then release it.
When the high beams are
on, this blue light on the
instrument panel also will
be
on.
The headlamp highfiow beam indicator light may flash
if
the
Daytime Running Lights ( D m )
system is
experiencing a problem or if a headlamp is
malfunctioning.
~
2-32