Epsolar LS1024RPD Instruction Manual page 20

 Battery Type Setting
When battery type setting indicator is on, press the setting button for
more than 5 seconds till the LED digital tube flashes. Then press the setting
button till the desired number appears according to the following table. The
setting is finished till the LED digital display stops flashing.
Battery type setting
Sealed lead acid battery
Flooded battery
Note: There will be 10 minutes delay for the load to
turn on after sunset and to turn off before sunrise.
Because the controller requires 10 minutes of delay
before it starts to work. These constraints avoid false
transitions due to lightning or dark storm clouds.
Note: If either of the two loads is TEST MODE. The
two loads will be TEST MODE simultaneously.
Note: If either of the two loads is ON/OFF MODE. The
two loads will be ON/OFF simultaneously. But there is
an exception, as long as one of the loads is TEST
MODE, the TEST MODE will prevail.
Battery type
Gel battery
LED digital No.
16
Table 4-6
1
2
3