Fog Lamps (&Door Models)
1. Remove the pins from the cover above the fog
lamps.
3.
4.
5 .
6.
7.
8.
2.
Pull out the bulb socket.
Turn the bulb socket
counterclockwise until it
pops loose from the
housing.
Lift the plastic locking tab on the electrical
connector and pull the connector from the bulb
socket.
Snap the electrical connector into a new bulb socket.
Install the screws.
Replace the socket into the housing and turn
clockwise until it snaps in place.
Replace the cover and pins.
6-4
1