Table of Contents
Advertisement
'To adjust the HUD
so you can
see it properly:
1. Start your engine and
turn the HUD dial all
the way up.
2.
3.
4.
When the headlamps are off, the HUD image will
be at a preset daytime brightness.
brightness is controlled by the d i m e r control.
When the headlamps are on, the HUD image
Adjust your seat, if necessary, to a comfortable
position.
Press the top of the IMAGE switch until the HUD image
stops moving. Then press the bottom of the switch until
the image is as low as possible but in full view.
Turn the HUD dial down until the HUD image is no
brighter than necessary. To turn the HUD off, turn
the HUD dial all the way down.
If the sun comes out, it becomes cloudy, or if you turn
on your headlamps, you
may
need to adjust the HUD
brightness again, Polarizing sunglasses could make the
HUD image harder to see.
speedometer from English
to metric or metric to
English. If you don't have
the trip calculator,
you can't
1
change the display.
2-61
Advertisement
Table of Contents
