Table of Contents
Advertisement
Playing a Cassette Tape
The longer side with the tape visible should face to the
right. If the radio is on, the tape will begin playing.
If
you hear nothing or hear a garbled sound, the tape may
not be in squarely. Press EJECT to remove the tape and
start over.
While the tape is playing, use the VOL, FADE, BAL,
TREBLE, BASS and the graphic equalizer controls just
as you do for the radio. Other controls may have
different functions when a tape is inserted. The display
will show a cassette symbol and an arrow to show which
side of the tape is playing.
Your tape bias is set automatically.
Press this button to search for the previous
selection on the tape. Your tape must have at least fow
seconds of silence between each selection for PREV to
work.
NEXT: Press this button to go to the next selection on
the tape. Your tape must have at least four seconds of
silence between each selection for NEXT
to
work.
The SEEK down and up arrows will also find the
previous and next selections on the tape.
REV:
Press this button to reverse the tape rapidly. Press
it again to return to playing speed. The radio will play
while the tape reverses. Use
TUNE
or SEEK to change
the radio station.
FWD:
Press this button to advance quickly to another
part of the tape. Press the button again to return to
playing speed. The radio will play while the tape
advances. Use TUNE or SEEK to change the radio
station.
PROG:
Press this button to change the side of the tape
that is playing.
00:
Press this button to reduce background noise on
Dolby@ encoded tapes.
Dolby@ B Noise Reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
"Dolby" and the
On@
symbol are trademarks of Dolby
Laboratories Licensing Corporation.
3-9
Advertisement
Table of Contents
