0
The horizontal indcator
should read "0."
I
NOTICE:
To make sure your headlamps are aimed
properly, read all the instructions before
beginning. Failure to follow these instructions
could cause damage to headlamp parts.
~
~
~~
State inspection stations will allow a vertical reading of
plus 0.76 degrees or minus 0.76 degrees for the center of
the bubble.
It is recommended that the upper limit not exceed plus
0.4 degrees for the center of the bubble. Other drivers
may flash their bright lights at you if your adjustment is
much above plus 0.4 degrees.
6-30