Table of Contents
Advertisement
0
Push in the SET button at the end of
the lever and release it.
Take your foot off the accelerator
pedal.
1 T o Resume a Set Speed
uppose you set your Cruise Control at a
esired speed and then you apply the
rake. This, of course, shuts off the
lruise Control. But you don't need to
:set it. Once you're going about 25 mph
$0 kmh) or more, you can move the
lruise Control switch from ON to R/A
Zesume/Accelerate) for about half a
xond.
ou'll go right back up to your chosen
3eed and stay there.
To Increase Speed While
Using Cruise Control
There are two ways to go to a higher
speed. Here's the first:
Use the accelerator pedal to get to the
higher speed.
0
Push the button at the end of the lever,
then release the button and the
accelerator pedal.
You'll now cruise at the higher speed.
Here's the second way to go to a higher
speed:
Move the Cruise switch from ON to
R/A. Hold it there until you get.up to
the speed you want, and then release
the switch.
To increase your speed in very small
amounts, move the switch to R/A for
less than half a second and then
release
it.
Each time you do this,
your vehicle will go about 1 mph
(1.6 km/h) faster.
t
Advertisement
Table of Contents
