Shutting Off The Engine - benza ER73AV2TE Information For Users

Once the engine is up and running, allow it to heat up for a few seconds before beginning work.
If the engine is hot:
You only need to check that the engine start/stop switches located on the handlebar (fig.7 and fig.11) and on the
engine (p.6 letter "O") have been placed in the "on" position, before pulling the starter cord.
FIG. 10
Grip

SHUTTING OFF THE ENGINE

Put the engine switch, which is red and located on the handlebar, into the "OFF" position. (fig. 7 and fig.11)
FIG. 11
Rotavator drive handle
I
36
Information for users
Starter
cord
Traction
handle
wheels
Accelerator
Start/stop switch