WEG Drive Scan Manual page 48

SETTING THE DRIVE SCAN ON THE MFM
Step 15 If successful, proceed to Step 16. If an error message pops up
and click on:
"Back": return to Step 11.
If the error persists:
return to the configuration tab;
use the Factory Reset option
return to Step 1, it is necessary to redo all the settings.
6
Medium Voltage Devices | 6-10
(Figure 6.18);
Figure 6.17: Failed to unlink the Drive Scan from the MFM
Figure 6.18: Command to reset the Drive Scan to factory default
(Figure 6.17), check its content