WEG Drive Scan Manual page 46

SETTING THE DRIVE SCAN ON THE MFM
Step 12 The plants previously registered on the MFM, as per Chapter 2, are displayed.
Select the plant this Drive Scan should be linked to. If no plant is selected, the system will not
advance.
Then, select one of the actions for the plant:
"Create Device": links the Drive Scan as a new gateway on MFM;
"Replace Device": replaces the Drive Scan with another existing gateway on MFM.
Clique no botão:
"Next":
–
–
"Back": return to Step 11.
6
Step 13 Step 13 It is informed that the Drive Scan will be created in the MFM after the configuration is
saved, as shown in
Click on the button:
"Back": return to Step 12;
"Finish": finishes the wizard and advances to Step 16.
Medium Voltage Devices | 6-8
Go to Step 13 (if "Create Device" option -
Go to Step 14 (if "Replace Device" option);
Figure 6.14: Action on the plant of the Drive Scan MFM
Figure 6.15.
Figure 6.15: Information about creating the Drive Scan MFM
Figure 6.14);