Related Manuals for Philco GH609
Summary of Contents for Philco GH609
- Page 1 INSTALLATION 650mm top of cooking surface Positioning Fixing dimensions WARNING! these instructions may result in electrical hazards.
-
Page 2: Drilling Holes
Drilling holes ● Mark the location for flue cover wall mounting brackets, rangehood mounting points and anti-tilt fixing points above the rangehood using the base as the reference point (Fig. 1). 250 mm Upper chimney extension bracket attachment points 250 mm Chimney bracket attachment points 250 mm... - Page 3 Fig.2 Attached hood on wall ● Remove the aluminium filters from the rangehood body and hang it on the mounting screws then secure at the anti-tilt locations as indicated in Fig. 3. Fig.3...
- Page 4 Connect ducting adapter ● Connect Ø150mm ducting adapter to the blower outlet and use screws ST 4x12mm to fix it to the range hood (Fig. 4). Ø150 to Ø125mm adapter Ø150mm Ducting adapter Fig.4 ● If necessory, connect the Ø150 to Ø125mm adapter to the Ø150mm ducting adapter (Fig.
- Page 5 Attach the chimney Fig.6 Connect ducting adapter ● Fix the chimney to the top bracket using two screws ST 4x12mm. Connect top of the ducting tube to vent kit as per manufacturers instructions (Fig. 7). ● Install back the aluminium filters to rangehood, and remove the protection film from rangehood and chimney.
- Page 7 ST 4x32 螺絲和膨脹膠塞。...
- Page 9 Ø Ø Ø...
- Page 10 安裝煙囪 圖6 連接煙囪 ST 4x12 毫米 將煙囪固定在頂部支架上，用 螺絲 安裝及固定。 將排氣管的頂部連接 到支架上（圖 ）。 將金屬隔油網裝回抽油煙機上，並 將其保護膜取下。 圖...
Need help?
Do you have a question about the GH609 and is the answer not in the manual?
Questions and answers