Keypad Keys - ABB ATS022 Installation And Operating Instructions Manual

5. Using the automatic transfer switch Installation and operating instructions, ATS022

5.3 Keypad keys

CB1 key
In manual mode, press the CB1 key for Opening/Closure of circuit breaker CB1.
CB2 key
In manual mode, press the CB2 key for Opening/Closure of circuit breaker CB2.
RESET
Press RESET to select the Manual or Automatic operating mode.
In case of alarm, press RESET to reset the alarm and the device returns to manual mode. Press RESET
again to bring the device to automatic mode.
TEST key
Press the TEST key to set the test modes of the
direct and inverse switching sequences.
ATS022 must be in the manual position. To exit TEST mode press
RESET.
Enter key
Used for confirming the action or entry to the menu.
ESC key
Used for cancelling an action and returning to previous menu.
UP key
Used for moving up on the menu.
DOWN key
Used for moving down on the menu.
19
1SDH000760R0002