Step 3 - Changing Parameters - BONFIGLIOLI Vectron S2U IP20 Quick Start Manual

Step 2 – Power up the inverter, check digital operator
This step describes the indications and functions of the Operator panel.
EN
D
Step 3 – Changing parameters
Example 1: Modifying Parameters (in complete Parameter Set)
Frequency
2
F
A B
C
G
E
S2UIP20_TD_QSGKeypad
Fig. 1a
S2UIP20_TD_QSGKeypad
Short press
MODE once
Short press
</ENT once
▲
Short press
once
Long press
</ENT once
A Description of keys (C):
Forward
direction status
RUN: Run inverter in Local Mode.
indicator
STOP/RESET: Decelerate or Coast to Stop. / Reset
B
Reverse direction
alarms or resettable faults.
status indicator
▲: Increment parameter number and preset Values.
C 6-button
▼: Decrement parameter number and preset
membrane Values.
keypad MODE: Switch between available displays
FUN: Examine the parameter content
D Run button
ENT: Display the preset Value of parameters and
E Stop button
save the changed parameter values.
F
LED display
"" Left Shift: used to change parameters or
G
Frequency
parameter Values
potentiometer
FREQ SET: Set the frequency.
S2U IP20 Control Settings (Factory Default)
 RUN/STOP Control:
Press RUN button to START the drive.
 SPEED Control:
While number is flashing the speed reference can be changed.
Short press
</ENT twice
Long press
</ENT once
Quick Start Guide S2U IP20
RUN/STOP buttons on keypad
Arrow buttons UP and Down on keypad
Short press
once
▲
08/19