Table Of Contents - Directed DB3 Installation Manual

Contents
Introduction
Vehicle function compatibilities
Pre-installation and application warnings
OEM remote starter detection
Wiring diagram
Locating components in the vehicle
Vehicle connections
Connecting the module
Module programming
IMPORTANT!Before programming your module, you must first check if your vehicle is equipped with an OEM
remote starter and disable it. If the vehicle is equipped with an OEM remote starter, whether Active or Inactive,
itMUSTbe temporarily disabled or permanently disconnected depending on the vehicle.Please refer to the "OEM
remote starter information" section of the guide for additional details.Note:In some cases, the module will program to
the vehicle even if equipped with an OEM starter, but will prevent the aftermarket remote start from functioning
properly.
LED diagnostics and troubleshooting
Soft reset
Hard reset
Feature programming
Feature and option list
Limited one year consumer warranty
Quick reference guide
3
3
4
4
6
7
8
7
8
8
9
11
11
12
13
13
14