Related Manuals for Wren Kitchens Vogue BASE UNIT 150 Pull Out
Summary of Contents for Wren Kitchens Vogue BASE UNIT 150 Pull Out
- Page 1 BASE UNIT 150 - 300 Pull Out Assembly Guide 150 Pull Out 300 Pull Out For Internal Use: FI.WR.INS.029_WKIN00101_BASE_PullOut_150-300_1Dr_Rev6.indd...
- Page 2 BASE UNIT 150 - 300 Pull Out Assembly Guide BEFORE YOU START INSTALLATION SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED Panel A Panel B Panel C Legs Frontal x1Back Panel x2 End Panel x2 Base Fixed Panel (Packed separately) (F) x8...
- Page 3 Step 1. Step 2. Seat dowel (F) Seat cam dowel (G) into into holes in holes in both end panels (B) Seat (G) cam dowel both end panels (B) as shown. into hole as as shown. shown. Dowel (F) & Cam Dowel (G) location detail Step 3.
- Page 4 BASE UNIT 150 - 300 Pull Out Assembly Guide Step 5. Slide back panel (A) into groove of end panels (B). Once back panel (A) is in position, ensure the panel is flush & square with bottom of end panels (B). Step 6.
- Page 5 Front Step 8. Position legs as shown. Ensure legs are rotated to also provide support to the end panels (B). Front Leg position diagram Step 9. Secure each of the legs into place with 4 x 15mm screws (L) per leg. View from front Step 10.
- Page 6 BASE UNIT 150 - 300 Pull Out Assembly Guide Pull Out Pack Please refer to separate installation instructions included with your pull out contents. For Step 1 in pull For Step 2 in pull out instructions. out instructions. Use 16mm screws. Use 16mm screws.
- Page 7 Screw to Adjacent Unit Screw through side panels (B) where appropriate, into any side units, using the 30mm screws (K) provided to secure to unit. Place a cover cap (M) on the head to conceal it. Screws for attaching to walls and worktop are not provided as these vary depending on materials, thickness and construction.
Need help?
Do you have a question about the Vogue BASE UNIT 150 Pull Out and is the answer not in the manual?
Questions and answers