Wren Kitchens Vogue BASE UNIT 1000 2 Drawer Assembly Manual
Hide thumbs
Also See for Vogue BASE UNIT 1000 2 Drawer:
- Assembly manual (8 pages) ,
- Assembly manual (12 pages) ,
- Assembly manual (8 pages)
Related Manuals for Wren Kitchens Vogue BASE UNIT 1000 2 Drawer
Summary of Contents for Wren Kitchens Vogue BASE UNIT 1000 2 Drawer
- Page 1 BASE UNIT 1000 2/3 Drawer Assembly Guide 1000 2 Drawer 1000 3 Drawer For Internal Use: FI.WR.INS.027_WKIN00111_BASE_1000_2_3Drawer_Rev7.indd...
-
Page 2: Before You Start
BASE UNIT 1000 2/3 Drawer Assembly Guide BEFORE YOU START INSTALLATION SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED Standard Drawer (Packed Separately) Fitting Pack Contents METAL BACK PANEL (J) x16 (Q) x4 (N) x1 Drawer Runner 21mm... - Page 3 Step 1. Secure drawer base to drawer side using 4 x 16mm drawer runner screws (J) in holes provided. Seat the edge of drawer base tight Drawer into corner of casing, as shown. base The decorative face of drawer base to be positioned as shown.
- Page 4 BASE UNIT 1000 2/3 Drawer Assembly Guide Step 1. Secure drawer base to drawer side using 4 x 16mm drawer runner screws (J) in holes provided. Drawer base Seat the edge of drawer base tight Metal white decorative back into corner of casing, as shown. face up panel The decorative face of drawer base...
- Page 5 1000 Drawer Unit Contents BEFORE YOU START INSTALLATION SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED Panel B Panel A Panel E Panel C x2 End Panel x1 Back Panel x2 Rail Panel x1 Base Panel (F) x12 (G) x8...
- Page 6 BASE UNIT 1000 2/3 Drawer Assembly Guide 37mm 261mm Drawer runner bracket screw position 431mm 74mm From Bottom 2 drawer Step 1. 646mm To attach drawer runner screw into end panels (B) using 2 x 16mm screws (J) per drawer runner, into pilot holes provided, 3rd hole from front, 360mm...
- Page 7 Step 2. Step 3. Seat dowel (F) Seat cam dowel (G) into into holes in holes in both end panels (B) Seat (G) cam dowel both end panels (B) as shown. into hole as as shown. shown. Dowel (F) & Cam Dowel (G) location detail Step 4.
- Page 8 BASE UNIT 1000 2/3 Drawer Assembly Guide Step 6. Slide back panel (A) into groove of end panels (B). Once back panel (A) is in position, ensure the panel is flush & square with bottom of end panels (B). Step 7. Hand tighten all cam locks (H), this will expand cam dowels (G) and tighten the unit together.
- Page 9 Front Front Step 9. Position legs as shown. Ensure legs are rotated to also provide support to the end panels (B). Leg position diagram Step 10. Secure each of the legs into place with 4 x 15mm screws (L) per leg. Step 11.
- Page 10 BASE UNIT 1000 2/3 Drawer Assembly Guide Screws for attaching to walls and worktop are not provided as these vary depending on materials, thickness and construction. Ensure appropriate fixings for wall and worktop construction are used. Please refer to the specialist worktop supplier if these are required for solid surface worktops.
- Page 11 For Internal Use: FI.WR.INS.027_WKIN00111_BASE_1000_2_3Drawer_Rev7.indd Page 10...
Need help?
Do you have a question about the Vogue BASE UNIT 1000 2 Drawer and is the answer not in the manual?
Questions and answers