Playing Back Tapes; Playing Back A Tape - JVC PC-X270 Instructions Manual

Playing Back Tapes

You can play back only type I (Normal) tapes.

Playing Back a Tape

1
Press STOP/EJECT 7 /0 for the deck you
want to use.
For Deck A
For Deck B
2
Put a cassette in, with the exposed part of the
tape down.
3
Close the cassette holder gently.
4
Press TAPE.
5
Press PLAY 3.
The tape play starts.
When the tape plays to the end, the deck
automatically stops.
To stop during play, press STOP/EJECT 7/0.
To operate the other deck, press STOP/EJECT 7/0, then
PLAY 3 on the other deck.
To fast wind to the left or to the right, press REW 1/FF
¡ while the tape is not running.
To remove the cassette, press STOP/EJECT 7/0 for deck A
or STOP/EJECT 7/0 for deck B.
To play the tapes in B and A cassette decks
continuously
1
Set the cassette tapes in A and B decks.
• If the tape direction is set wrong, remove the cassette.
2
Press PLAY 3 for the deck B.
The tape in the B deck begins to play.
3
Press PLAY 3 for the deck A after pressing
PAUSE 8 for the deck A.
When the tape in deck B ends, the tape in deck A
automatically begins to play.
PAUSE
The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.
PLAY
– 14 –
PLAY
PLAY