Table of Contents
Advertisement
Playing Back Tapes
• Use only type I normal tapes.
The use of tapes longer than 120 minutes is not
recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinchrollers and
the capstans.
Loading a Tape
1 Press 0 EJECT to open the
tape deck door.
2 Insert a recorded tape with the open side
down and close the tape deck door.
Tape Playback
1 Press TAPE/REV.MODE.
The unit automaticaly turns on.
2 Press 8/2 or 3/8 to select
the playback direction.
Playback starts.
"PLAY" appears on the display and
the playback direction indicator
moves to show the tape direction.
3 To stop playback, press 7.
To interrupt playback
Press the last selected 8/2 or 3/8.
"PAUSE" appears on the display.
• If you press the button opposite to the last selected
direction, playback starts in the reverse direction.
To resume playback, press 8/2 or 3/8 again.
Auto Reverse
Press TAPE/REV.MODE repeatedly
to select the desired playback mode.
:
playback on one side of the tape only.
: both sides are played once.
: both sides are played repeatedly up to 10 times unless
you press 7.
Rewind/Fast Forward
EJECT
1 Press 4 or ¢ to rewind or
fast forward the tape.
"TAPE" appears and the playback
direction indicator blinks on the display.
2 Press 7 to stop rewinding or fast
forwarding.
• The tape stops automatically at the end of the rewinding or
fast forwarding.
REV. MODE
TAPE
DIRECTION
PLAY/PAUSE
STOP/CLEAR
DIRECTION
PLAY/PAUSE
– 17 –
REV. MODE
TAPE
SEARCH/TUNING
STOP/CLEAR
Advertisement
Table of Contents
