Getting Started; Unpacking; Putting The Batteries Into The Remote Control; Connecting Speakers - JVC PC-X270 Instructions Manual

Getting Started

Unpacking

After unpacking, check to be sure that you have all the
following items.
The number in the parentheses indicates the quantity of the
pieces supplied.
• Remote control (1)
• AC power cord (1)
If any is missing, consult your dealer immediately.

Putting the Batteries into the Remote Control

Insert the batteries — R03(UM-4)/AAA(24F) — into the
remote control, by matching the polarity (+ and –) on the
batteries with the + and – markings on the battery
compartment.
When the remote control can no longer operate the unit,
replace both batteries at the same time.
1
3
• DO NOT use an old battery together with a new one.
• DO NOT use different types of batteries together.
• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery
compartment when you are not going to use the
remote control for an extended period of time.
Otherwise, it will be damaged from battery leakage.
R03(UM-4)/AAA(24F)
2
(not supplied)

Connecting Speakers

Insert the L (left) and R (right) speaker cords into the
corresponding speaker terminals on the back of the unit.
Speaker cord
(To right speaker)
Speaker cord
(To left speaker)
Attaching the speaker system to the main unit
Fit the speaker into the grooves on the main unit and slide
down the speaker vertically as the illustration shows.
Detaching the speaker system from the main unit
With the RELEASE lever on the back of the unit pushed in
the direction of the arrow, lift up the speaker vertically as the
illustration shows.
– 6 –
Continued
1
2
2
1