Hyundai 2003 Accent Owner's Manual page 78

B720A05A-AAT
DEFROSTING/DEFOGGING
Use the heating/ventilation system to defrost or defog the
windshield:
To remove interior fog on the windshield:
o Set the air intake control to the fresh air (
o Set the air flow control to the defrost (
(The air conditioning will be turned on automati-
cally.)
o Set the temperature control to the desired position.
o Set the fan speed control between "1" and "4" position.
NOTE:
When the A/C is operated continuously on the floor-defrost level (
cause fog to form on the exterior windshield. If this occurs, set the air flow control to the face level
position ( ) and fan speed control to the low position.
B720B01A-1
To remove frost or exterior fog on the windshield:
o Activate the windshield wipers and washer to remove
light frost and moisture.
o Set the air intake control to the fresh (
) position.
o Set the air flow control to the defrost (
) position.
(The air conditioning will be turned on automati-
cally)
o Set the temperature control to warm.
o Set the fan speed control to position "3" or "4".
FEATURES OF YOUR HYUNDAI
) or defrost level (
1- 65
B720B02A-1
) position.
) position.
), it may