Hyundai 2003 Accent Owner's Manual page 34

B230B01E-GAT
Using a Child Restraint System with
the "Tether Anchorage" System
Holder Bolt (5/16"-30 mm)
Washer, Conical Spring
Holder, Child Restraint Hook
Spacer(6mm : 4 Door or
10mm : 3 Door), Child
Restraint Hook Holder
Retainer Washer
For small children and babies, the use of a child
seat or infant seat is strongly recommended.
This child seat or infant seat should be of appro-
priate size for the child and should be installed
in accordance with the manufacturer's instruc-
tions. It is further recommended that the seat be
placed in the vehicle's rear seat since this can
make an important contribution to safety. Your
vehicle is provided with three child restraint
hook holders for installing the child seat or infant
seat.
B230C03A-AAT
Installing a Child Restraint Seat with
the "Tether Anchorage" System
(4 Door)
Three child restraint hook holders are located
on the rear seat package tray.
To install the child restraint seat
B230B01TB
Tether anchor
cover
1. Open the tether anchor cover on the rear
seat package tray.
Rear seat package tray
Tether Strap
Child Restraint
Hook
Hook Holder B230C01A
2. Route the child restraint seat strap over the
FEATURES OF YOUR HYUNDAI
Child Restraint
Hook Holders
Front of Vehicle
seatback.
1- 21
B230C02A-1