Advertisement
OPERATING INSTRUCTIONS
TO ATTACH BATTERY PACK (fig 1)
1. Make sure that the circular saw is turned off.
2. Align the raised rib on the battery pack with the
grooves on the bottom of the saw, and then attach the
battery pack to the saw.
TO DETACH BATTERY PACK (fig 1)
1. Make sure that the circular saw is turned off.
2. Depress the battery-release button, located on the front
of the battery pack, to release the battery pack.
3. Pull forward on the battery pack to remove it from the tool.
VACUUM ADAPTOR (fig 2)
Your tool is equipped with a vacuum adaptor
(Ø1-1/4'') for connecting a vacuum cleaner.
1. To attach a vacuum adaptor to the saw, insert it into the
slot of the upper blade guard and then use the locking
screw (included) to secure it.
2. To remove the vacuum adaptor from the saw, just
loosen the locking screw on the vacuum adaptor.
NOTICE:
When attaching the battery pack to the tool, make sure that the raised platform on the pack aligns with the grooves
on the bottom of the tool and that the latches snap properly into place. Improper assembly of the battery pack can cause damage to
internal components.
WARNING!
• Choose a suitable vacuum-cleaner hose or use an adaptor, if necessary.
Never allow a vacuum-cleaner hose to interfere with the lower guard or the cutting operation.
• To have a better working environment, always use the vacuum cleaner to connect your vacuum adaptor to
reduce the wood dust.
fig 1
fig 2
Screw holes
Battery-release
button
Detach
Attach
Vacuum adaptor
13
Advertisement
