Installation Safety Instructions - B-Tech BT8385-CTW Quick Start Manual

Column-to-wall mounting kit use with a bt8385 column
Table of Contents

Advertisement

CAUTION:
maximum weights indicated. Use with equipment heavier than the
maximum indicated may result in instability causing possible injury.
B-Tech AV Mounts, it's distributors and dealers are not responsible for damage or injury caused by improper installation,
improper use, modifications, installations over the specified weight capacity and/or failure to observe these safety
instructions. In such cases, any warranty will expire.
It is recommended that this product should only be installed by a qualified professional / installer.
B-Tech AV Mounts does not claim any liability for any difficulties that may arise from the interpretation contained
in these instructions. Failure to mount this product correctly may lead to serious injury and/or death.
Please check carefully to make sure there are no missing or defective parts - defective parts must never be used.
In the event of missing and/or defective parts, or technical questions, please contact an authorised dealer.
Pay careful attention to where this product is located, some locations are not suitable for installation. For indoor use only.
It is recommended that periodic inspections of the product are made as frequently as possible to ensure that safety is maintained.
Please keep these instructions for future reference.
1.
ATTACH WALL PLATE
Attach item 1 to the top of a BT8385 column using item 3.

INSTALLATION SAFETY INSTRUCTIONS

This product is intended for use only with the
Installation Instructions
3
1
BT8385
COLUMN
BT8385-RTC
2
7
3
1

Advertisement

Table of Contents
loading

Table of Contents