Installing The Machine; Preparation - Ricoh Ri 2000 Quick Installation Manual

Installing the Machine

Preparation

Do not use flammable sprays or solvents in the vicinity of this machine. Also, avoid placing these items
•
in the vicinity of this machine. Doing so may result in fire or electric shock.
• Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers holding
water or any other liquids, on or close to this machine. Fire or electric shock may result from spillage
or if such objects or substances fall inside this machine.
• Keep the machine away from condensation and dust. Otherwise, a fire or an electric shock might
occur.
Do not place the machine on an unstable or tilted surface. If it topples over, an injury may occur.
•
Do not obstruct the machine's vents. Doing so may overheat internal components and might cause a
•
fire.
• Ensure adequate ventilation to keep the occupational exposure in the workplace in line with the
occupational exposure guidelines (such as ACGIH) in the region. If necessary, provide local
ventilators for required ventilation.
Recommended ventilation: 150 m
environment.)
Keep children away from the machine. Otherwise, their hands or fingers may be caught in the gap and
•
injury may result.
• Keep people other than operators away from the machine. Otherwise, their hands or fingers may be
caught in the gap and injury may result.
Use at an altitude of 2,500 m or less. There is a possibility of electric shock, electric leakage, fire if it
•
is used in an environment exceeding 2,500 m altitude.
3
/h (The required ventilation depends on the installation
19