Wren Kitchens Vogue BASE UNIT 150 WALL Assembly Manual page 10

WALL / SHALLOW BASE UNIT
150 - 600 Assembly Guide
Step 28.
Adjust hinge to suit. As shown below.
FRONTAL
HINGE
ADJUSTMENT
To Move the
hinge up/down,
loosen screws
A + B,
Manoeuvre
the door, then
re-tighten the
screws
Page 9
Step 26.
Secure hinges by tightening
2 x screws with hinge dowels
attached. These are already
positioned within the hinges.
Step 27.
Attach the door to unit
where required. To attach
door, clip hinge onto hinge
plate and click to secure.
To adjust hinge using
a screw driver, tighten
or loosen as required at
points 1 & 2.
Point 1 - In - Out
Point 2 - Left - Right
A
1
2
B
To release door,
pull catch as shown,
to release hinge from
the hinge plate.
View from inside of unit
Step 25.
Insert hinge in top & bottom
holes as shown below.
Step 29.
Fit cover caps to hinge.
Adjust Soft close to suit.
Hinge Cover Caps
The top and bottom
hinges MUST be
adjusted to the SAME
STRENGTH.
Hinge Plates