Configuring A Bar Code Reader - EDAN SE-1200 Series Service Manual

SE-1200 Series Electrocardiograph Service Manual

4.1 Configuring a Bar Code Reader

1. When the Advanced Setup screen is displayed, press Tab or Shift + Tab, or the Up, Down,
Left or Right arrow to move the cursor to Barcode, and then press Enter to open the
Barcode Setup window.
2. Enter the start and end addresses, the male and female codes, the vendor ID and the product
ID, and then press Enter to confirm.
View the vendor ID and product ID on the PC:
1) Connect the bar code reader to the PC
2) Right-click on My Computer, and then select Manage in the pop-up menu to open the
Computer Management screen.
3) On the Computer Management screen, click on Device Manager. Right-click on
HID Keyboard Device, and then select Properties in the pop-up menu.
Optional and Advanced Functions
- 21 -