Table of Contents
Advertisement
FX
-J1939 User's Manual
3U
Outline Precautions
• This manual provides information for the use of the FX
been written to be used by trained and competent personnel. The definition of such a person or persons is
as follows;
1) Any engineer who is responsible for the planning, design and construction of automatic equipment
using the product associated with this manual should be of a competent nature, trained and qualified to
the local and national standards required to fulfill that role. These engineers should be fully aware of all
aspects of safety with aspects regarding to automated equipment.
2) Any commissioning or maintenance engineer must be of a competent nature, trained and qualified to
the local and national standards required to fulfill the job. These engineers should also be trained in the
use and maintenance of the completed product. This includes being familiar with all associated
manuals and documentation for the product. All maintenance should be carried out in accordance with
established safety practices.
3) All operators of the completed equipment should be trained to use that product in a safe and
coordinated manner in compliance with established safety practices. The operators should also be
familiar with documentation that is connected with the actual operation of the completed equipment.
Note: The term 'completed equipment' refers to a third party constructed device that contains or uses the
product associated with this manual.
• This product has been manufactured as a general-purpose part for general industries, and has not been
designed or manufactured to be incorporated in a device or system used in purposes related to human life.
• Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine
or passenger movement vehicles, consult with Mitsubishi Electric.
• This product has been manufactured under strict quality control. However when installing the product
where major accidents or losses could occur if the product fails, install appropriate backup or failsafe
functions into the system.
• When combining this product with other products, please confirm the standards and codes of regulation to
which the user should follow. Moreover, please confirm the compatibility of this product with the system,
machines, and apparatuses to be used.
• If there is doubt at any stage during installation of the product, always consult a professional electrical
engineer who is qualified and trained in the local and national standards. If there is doubt about the
operation or use, please consult your local Mitsubishi Electric representative.
• Since the examples within this manual, technical bulletin, catalog, etc. are used as reference; please use it
after confirming the function and safety of the equipment and system. Mitsubishi Electric will not accept
responsibility for actual use of the product based on these illustrative examples.
• The content, specification etc. of this manual may be changed for improvement without notice.
• The information in this manual has been carefully checked and is believed to be accurate; however, if you
notice any doubtful point, error, etc., please contact your local Mitsubishi Electric representative.
Registration
®
• NMEA
and NMEA 2000
• The company name and the product name to be described in this manual are the registered trademarks or
trademarks of each company.
2
®
are registered trademarks of NMEA (National Marine Electronics Association).
-J1939 Communication block. The manual has
3U
Advertisement
Table of Contents
