Ford F-150 2000 Introduction Manual page 241

Replacing license plate lamp bulbs
The license plate bulbs are located
behind the rear bumper. To change
the license plate lamp bulbs:
1. Reach behind the rear bumper to
locate the bulb.
2. Twist the bulb socket
counterclockwise and carefully pull
to remove it from the lamp
assembly.
3. Pull out the old bulb from the
socket and push in the new bulb.
4. Install the bulb socket in lamp assembly by turning it clockwise.
Using the right bulbs
Replacement bulbs are specified in the chart below. Headlamp bulbs must
be marked with an authorized "D.O.T." for North America and an "E" for
Europe to assure lamp performance, light brightness and pattern and safe
visibility. The correct bulbs will not damage the lamp assembly or void the
lamp assembly warranty and will provide quality bulb burn time.
Function
Headlamps
Front park/turn lamps
Foglamps
Backup lamp
Rear stop/turn/sidemarker/tail
lamp
High-mount brakelamp
Cargo lamp
Running board lamp (if equipped)
License plate lamp
All replacement bulbs are clear in color except where noted.
To replace all instrument panel lights - see your dealer
Maintenance and care
Number of
bulbs
2
2
2
2
2
1
2
2
2
Trade number
9007
3157 NAK
(amber)
9145
3156K
3457K
912
912
168
168
241