Table of Contents
Advertisement
Maintenance and care
You will need one 7 mm box
wrench, open end wrench or T-15
Torx drive.
If the vehicle has been in an
accident, the vehicle's front
structure should be properly
aligned before aiming the
headlamps.
Adjusting the horizontal aim
1. Make sure the vehicle is on a
level surface.
2.With the hood open, locate the
horizontal indicator and adjusting
screw through the viewing hole on
the outboard side of the headlamp.
3. Turn the horizontal adjusting
screw until the "0" reference mark
on the horizontal indicator aligns
with the arrow pointer on the
adjusting screw assembly.
214
Hide quick links:
Advertisement
Table of Contents
