Ford 2000 Contour Manual page 169

Hide thumbs Also See for 2000 Contour:
Table of Contents

Advertisement

Engine oil
Use SAE 5W-30 motor oil
CERTIFIED FOR GASOLINE
ENGINES by the American
Petroleum Institute.
Do not use supplemental engine oil
additives, oil treatments or engine
treatments. They are unnecessary
and could, under certain
conditions, lead to engine damage
which is not covered by Ford
Warranty.
Checking the engine oil
Check the engine oil each time you
fuel your vehicle.
To check the oil:
1. Make sure the vehicle is on level
ground. If the engine is warm, turn
the engine off and wait a few
minutes for the oil to drain into the
oil pan.
2. Set the parking brake and ensure
the gearshift is securely latched in
P (Park). Put the manual transaxle
gearshift in 1 (first) or R (reverse).
3. Open the hood. Protect yourself
from engine heat.
4. Locate and carefully remove the
engine oil dipstick.
5. Wipe the dipstick clean. Insert
the dipstick fully, then remove it
again. The oil level should be
between the MIN and MAX marks.
Maintenance and care
FOR
GASOLINE
ENGINES
Do not exceed MAX!
2.0 l DOHC
Do not exceed MAX!
2.5 l DOHC
Motorcraft
FOR
GASOLINE
ENGINES
169

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Contour 2000

Table of Contents