Ford 1997 Aerostar Manual page 54

1. Select a band, then select a frequency.
2. Press one of the memory preset buttons and
hold the button until the sound returns. That
station is now held in memory on that
button.
3. Follow the two steps above for each station
memory preset button you want to set.
NOTE: If the vehicle's battery is disconnected,
the clock and station memory preset
buttons (if programmed in auto mode)
will need to be reset.
Using the Controls of Your Cassette Tape
Player (If equipped)
How to insert a tape
Insert a cassette (with the open edge to the
right) firmly into the tape door opening, making
sure the cassette is completely in and "seated."
NOTE: A cassette tape can be loaded with the
ignition on whether or not the radio
power is on.
How to locate a desired track on the tape
Using the Automatic Music Search ("AMS")
Press and hold the "AMS" button ("AMS"
will appear in the display). Then, push the
left ( h ) button to rewind to the beginning
of the current selection or press the right
( g ) button to fast forward to the beginning
of the next selection.
How to change the side of the tape being
played
The alternate track (other side) of the tape
can be selected at any time by pushing both
fast-wind buttons ( h and g ) at the
same time.
51