Changing A Tire - Ford 1997 Aerostar Manual

Hide thumbs Also See for 1997 Aerostar:
Table of Contents

Advertisement

Circuit Breakers
If you need to check a circuit breaker, locate the
fuse panel first. Otherwise, locate the circuit
breaker according to the instructions on the
charts given earlier in this chapter.
However, you should know that the circuit
breakers will reset themselves and allow the
electrical parts to work again once the overload
on the circuit is removed. If the circuit breakers
continue to cut off electricity, have your vehicle's
electrical system checked.
Diagnostic equipment is needed to check circuit
breakers. Refer to the manufacturer's
instructions.
If you replace a circuit breaker, use one with the
same amperage rating. To remove a circuit
breaker, grip it with your finger and thumb and
pull it straight out of its socket.

Changing a Tire

If you get a flat tire while you are driving, do
not apply the brake heavily. Instead, gradually
decrease the speed. Hold the steering wheel
firmly and slowly move to a safe place on the
side of the road. Park on a level spot, turn off
the ignition, set the parking brake, and turn on
the hazard flashers.
The Conventional Spare Tire
If you have the conventional spare tire, you can
use it as a spare or as a regular tire. This spare
tire is identical to the other tires that come with
your vehicle, although the wheel may not match.
209

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aerostar

Table of Contents