Table of Contents
Advertisement
L2 Repair Document
10 Function test
During the function test, the following items must be checked and validated.
1)
Cosmetic aspect of the handset,
2)
The Software Technical sticker state on the Board
3)
Switch on the handset
4)
Default welcome message
Open "Calculator" application, and input "0x0-0+=" to start the auto test
5)
Requirements
1.
Any L3 PCBA which has appearance like below cases is not acceptable.
Return of PCBA process
Swap PCBA
Visual inspection according to
Part 1
Y
Packing the PCBAs according
to Part 2
Send back L3
PCBAs
1) The PCBA which shielding cover is rusty or distortion, copper peel off;
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
1. RCs collect defective PCBAs
appearance problem and
with
N
send to RSH.
2. RSH keep the PCBAs.
×
8050X_D_G&E Level 2 Repair Document
TCL
Communication Ltd.
APPENDIX 1 Packaging
Page
63/68
Advertisement
Table of Contents
