NEXUS
TECHNOLOGY
Interior Rear Lightbar
2020-2021 Ford PI Utility
WARNING
•HIGH CURRENT interconnects must be properly terminated. Poor crimp quality can cause heat
build-up and fire. Follow crimp connector manufacturer instructions.
•DO NOT install this product or route any wires in the Air Bag Deployment Zone. Refer to vehicle
Owner's Manual for deployment zones.
•Do NOT use system to disconnect headlights, brake lights or other safety equipment.
•Unit may become hot to touch during normal operation.
•Failure to properly install connectors, fuses or wiring may cause vehicle failure or fire.
•Installation must only be performed by trained technician. Installer must determine vehicle wiring
configuration and proper integration of system.
•Use proper wire gauge. All power wires connecting to positive (+) or negative (-) battery terminal
or local chassis ground (-) must be sized to supply at least 125% of max. current and properly fused at
power source.
•Install protective grommets when routing wire through firewall or metal.
1.800.338.7337 / www.soundoffsignal.com
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at www.soundoffsignal.com/tech-services/returns/.
If you have questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. or after hours 5 p.m. to 8 p.m. ET at 1.800.338.7337 (press #4).
Questions or comments that do not require immediate attention may be emailed to techservices@soundoffsignal.com.
S U P E R I O R C U S TO M E R R E L AT I O N S H I P S . S M A RT LY D E S I G N E D L I G H T I N G & E L E C T R O N I C S O L U T I O N S .
NOTICE:
Improper use or installation may void warranty coverage.
INTRODUCTION:
Design highlights for 2020 Ford PI Utility
nFORCE
Lightbar for Rear Interior:
®
• 6 module, full shroud design
• Top cover incorporated into this rear interior
lightbar design, for improved look and
installation
• Improved wire management incorporated into
design
• Powder coat is smoother, less textured, than
traditional SoundOff Signal
interior lightbars
®
CONTENTS
QTY
COMPONENT
1
2020 FORD UTILITY REAR INTERIOR LIGHTBAR SHROUD
2
2020 FORD UTILITY REAR INTERIOR LIGHTBAR BRACKET
2020 FORD UTILITY REAR INTERIOR LIGHTBAR
2
STANDOFF
2
1/4" - 20 THREAD 2.5" LONG BUTTON SCREW
4
#8 X .50 TRUSS HEAD PHILLIPS SHEET METAL SCREW
1
PLASTIC FASCIA DRILL TEMPLATE
1
DRIVER SIDE DRILL TEMPLATE
1
PASSENGER SIDE DRILL TEMPLATE
1
PRODUCT WARNING CARD
1
INSTALLATION INSTRUCTION SHEET
WARNING
!
This product contains high intensity LED devices.
To prevent eye damage, DO NOT stare into the
light beam at close range.
nFORCE Interior Lightbar 2020-2021 Ford Utility REAR 0221
Need help?
Do you have a question about the nFORCE Lightbar for Rear Interior and is the answer not in the manual?
Questions and answers