Soundoff Signal mpower PMP2RS 02 Series Quick Start Manual

2020 FORD UTILITY SPOILER BRACKET
PMP2RSX02 - For use with mpower fascia Stud Mount Light
WARNING
•HIGH CURRENT interconnects must be properly terminated. Poor crimp quality can cause heat build-up and
fire. Follow crimp connector manufacturer instructions.
•DO NOT install this product or route any wires in the Air Bag Deployment Zone. Refer to vehicle Owner's
Manual for deployment zones.
•Do NOT use system to disconnect headlights, brake lights or other safety equipment.
•Unit may become hot to touch during normal operation.
•Failure to properly install connectors, fuses or wiring may cause vehicle failure or fire.
•Installation must only be performed by trained technician. Installer must determine vehicle wiring
configuration and proper integration of system.
•Use proper wire gauge. All power wires connecting to positive (+) or negative (-) battery terminal or local
chassis ground (-) must be sized to supply at least 125% of max. current and properly fused at power source.
•Install protective grommets when routing wire through firewall or metal.
1.800.338.7337 / www.soundoffsignal.com
1
4 MODULE
3 MODULE
2 MODULE
DRIVER'S SIDE SHOWN
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at www.soundoffsignal.com/tech-services/returns/.
If you have questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. ET at 1.800.338.7337 (press #4).
Questions or comments that do not require immediate attention may be emailed to techservices@soundoffsignal.com.

FEATURES:

• Warning arrow greatly reduces install time through use of 3-wire
technology
• Functionality mimics the rear of a lightbar
• Integrates under the spoiler of the vehicle for a seamless look
• Available in single, dual or tricolor

PART NUMBERS:

• PMP2RS102: Rear Spoiler Bracket, 1 Module Kit, Black, for use with
mpower
• PMP2RS202: Rear Spoiler Bracket, 2 Module Kit, Black, for use
with mpower
mpower Arrow Kit Light - Ford Utility 2020
• PMP2RS302: Rear Spoiler Bracket, 3 Module Kit, Black, for use
with mpower
mpower Arrow Kit Light - Ford Utility 2020
• PMP2RS402: Rear Spoiler Bracket, 4 Module Kit, Black, for use
1 MODULE
with mpower
mpower Arrow Kit Light - Ford Utility 2020
NOTICE:
Improper use or installation may void warranty coverage.
E N H A N C I N G S A F E T Y T H R O U G H I N N O VAT I O N
4" Fascia Stud Mount Light - Ford Utility 2020
®
4" Fascia Stud Mount, 3-Wire 4" Stud Mount Light &
®
4" Fascia Stud Mount, 3-Wire 4" Stud Mount Light &
®
4" Fascia Stud Mount, 3-Wire 4" Stud Mount Light &
®
COMPONENT
2020 Ford Utility Left Bracket 1
2020 Ford Utility Right Bracket 1
6-32 Rubber Insert 4
6-32 X 1.00" Torx Screw 4
Installation Instruction Sheet 1
Product Warning Card 1
mPOWER Spoiler BRKT_Utility 2020+ English 0820
QUANTITY
1 1 1
1 1 1
4 6 6
4 6 6
1 1 1
1 1 1