VGA
Starting of VGA
–
Select the target panel from the Flat Panel menu.
–
Click Get button of each function to get its current value.
Backlight Attribute Settings
–
For frequency, click Set/Get button aside to set/get the desired value.
–
For polarity, select Yes/No radio buttons to set polarity on/off. If polarity is not
controllable, the Yes/No radio buttons will be un-clickable.
Backlight ON/OFF
–
In Backlight Control region, select On/Off radio button to turn on/off. If back-
light On/Off is not controllable, the radio buttons will be unclickable.
–
Click Get button to get its current On/Off status.
Brightness Adjustment
–
In Backlight Brightness region, select PWM/ACPI radio button to select the
brightness control method. If the backlight control method is not available,
the radio button will be un-clickable.
–
Adjust the slider to adjust the brightness value.
–
Click the Get button to get the current brightness value.
55
MIO-3260 User Manual