Vivotek ND9312 User Manual page 43

Below is the PTZ panel that appears with ordinary PTZ cameras.
List of preset positions
Zoom in
Zoom out
1. PTZ control: Click on the arrow buttons to move towards the direction you wish to
move to.
2. Focus: Click on the Focus near and Focus far buttons to adjust camera focus.
3. Zoom: Use the Zoom in and Zoom out buttons to adjust the camera's zoom ratio.
4. Presets: If you configured preset positions, a list of preset positions will appear.
5. Speed: Adjusts the speed when moving across the field of view.
6. Patrol: If you configured preset positions into a patrolling tour, click on this button
and the camera will proceed with patrolling through the preset points.
This portal appears with a fisheye camera. Since it is for the fisheye camera,
the PiP and PTZ buttons will then be disabled.
IMPORTANT:
Due to the limitation of system resources, the fisheye dewarp (1R & 1P) can
only take place on one view cell, for one fisheye camera.
VIVOTEK - Built with Reliability
Speed selector
Focus far
Focus near
Starts patrol
User's Manual - 43