Table of Contents
Advertisement
2-2-6. Right-click Commands
Left-click to select a camera. Right-click to display the selection menu.
1. Camera information: Click to display camera name, resolution, codec, or frame rate on the
view cell. The information will display on the upper left corner of a view cell.
2. Disable live streaming: Choose to display snapshots on the screen instead. The snapshots
are regularly replaced.
3. Fit screen with ratio: The NVR server automatically optimizes the display of camera view
cells. However, you can still select this option to display the camera's original aspect ratio: for
example, the original video feed can be 4:3. Without the fit screen, every camera's image will
be expanded to fill the view cell.
4. Show tool bar: You can hide the tool bars by deselecting this option.
5. Pin status bar: If selected, the status bar will constantly display on screen.
6. Log in/Log out: Log in to enable system configuration.
A time tab is displayed at the lower center of the screen. You can move your cursor to the lower
center to display the time tab and the alarm panel.
VIVOTEK - Built with Reliability
User's Manual - 49
Advertisement
Table of Contents
