Vivotek ND9312 User Manual page 19

NOTE:
1. The maximum recording bandwidth is 24Mbps. When cameras are recruited into the
configuration, their stream #1 is used as the recording stream.
The resolution and fps (frame rate per second) of stream 1 may vary depending on the
specifications of different cameras.
2. If there are less than 8 cameras, the Auto Setup will automatically move to the next
configuration step.
3. Up to two clients viewing 2x 720P streams is acceptable. If more clients are simultaneously
viewing more video streams, the machine can be stressed.
5. You can skip the storage volume creation with the Crowd control solution.
The system will automatically create a volume from the installed disk drive. The process may
take several minutes.
6. An optional utility, VIVOCloud, is available through the Apple and Android App Stores. The
VIVOCloud works with a server hosted by VIVOTEK for bridging and tunneling video requests
between client devices and network cameras/CMS/NVR. The utility simplifies and facilitates
network configuration for access across the Internet.
The prerequisites for using the VIVOCloud are as follows:
1. Download and install the VIVOCloud utility to your cell phone.
2. Both the NVR and your cell phone have access to the Internet.
With this utility, you do not need to configure IP port forwarding on router or set up a DDNS
address for the NVR. You do not even need to know the IP address of the NVR. The
VIVOCloud utility automatically manages the network parameters required for making the
connection. The VIVOCloud comes with viewing and playback interfaces very similar to those
in the iViewer utility.
VIVOTEK - Built with Reliability
User's Manual - 19