Sony MVS-8000G-C Operational Manual page 8

this board, a maximum of 68 inputs (with three boards
added) can be reached. The MVS-8000GSF has 17 inputs
as standard, and can be extended to 34 inputs (with one
board added).
MKS-8111G Additional 12-Input Board
This is a 12-input extension board. By installing it in the
MVS-8000G, a maximum of 80 inputs can be reached.
(This option cannot be installed in the MVS-8000GSF.)
MKS-8160G 24-Output Board Set
This is a 24-output board set. One set can be installed in the
MVS-8000G only. This option increases the outputs to 48.
MKS-8161M Monitor Output Board
This is an HD/SD eight-output board for monitoring input
signals. (This output board only carries out reclocking of
the input signal, and no other processing.) One board can
be installed in the MVS-8000G only.
MKS-8162A 12-Output Connector Board
This is a 12-output connector board. One board can be
installed in the MVS-8000GSF only. This option increases
the outputs to 24.
MKS-8170G DME Interface Board
This is an interface board for input/output of video signals
with the MVE-8000A and MVE-9000 Multi Format DME
Processors.
This board allows up to two MVE-8000A or MVE-9000
units to be connected. One board can be installed in the
MVS-8000G only.
MKS-8210G Mix/Effect Board
This is an M/E board. The MVS-8000G has two M/E
banks installed as standard, which can be extended to four
M/E banks by installing this option. The MVS-8000GSF
has one M/E installed as standard, and can be extended to
two M/E banks by installing this option.
MKS-8442G Frame Memory Board
This is a frame memory board. A maximum of two can be
installed in the MVS-8000G. One board only can be
installed in the MVS-8000GSF.
MKS-8450G Format Converter Board
This is a format converter board.
Up to two boards may be installed. Each board provides
format conversion for eight inputs. Input formats can be set
separately for each board.
8
Overview
HK-PSU04 Power Supply Unit
This is a backup power supply unit. The MVS-8000G is
equipped with two power supply units preinstalled at the
factory, but installing two HK-PSU04 units provides a
fully redundant power supply. The MVS-8000GSF is
equipped with one power supply unit preinstalled at the
factory, but installing another HK-PSU04 unit provides a
fully redundant power supply.
BZS-8200 Multi Program 2 Software
This is software which enables the creation of two
different backgrounds utilizing transition effects in each of
the M/E banks of the MVS-8000G and MVS-8000GSF.
BZS-8250 Simple P/P Software
This is software which enables simple Program/Preset
functions on the MVS-8000G or MVS-8000GSF. It can be
installed in a MVS-8000G with four M/E banks, but it does
not serve any actual function except in dual link mode.
BZS-8420 Color Corrector Software
This is software which enables high-performance color
correction of two channels. It supports both HD and SD.
The optional MKS-8442G Frame Memory Board must be
installed to use this software.
BZS-8500M Switcher Upgrade Software
This is software to upgrade a standard MVS-8000G (for
SD; with two M/E banks) to support multi-format
switching.
BZS-8510M Switcher Upgrade Software
This is software to upgrade a standard MVS-8000GSF (for
SD; with one M/E bank) to support multi-format
switching.
BZS-8520M M/E Upgrade Software
This is software to upgrade the MKS-8210G board serving
as a third M/E bank of the MVS-8000G or as a second M/
E bank to the MVS-8000GSF, to support multi-format
switching.
BZS-8530M M/E Upgrade Software
This is software to upgrade the MKS-8210G serving as a
fourth M/E bank of the MVS-8000G, to support multi-
format switching.
BZS-8560 Switcher Upgrade Software
This software provides an upgrade to the multi-format
MVS-8000G for 1080P support (1080P/59.94 and 1080P/
50).