Mec Speed Level 84RT Series Operator's Manual page 20

Secton 6 - Functons Test & Operatng Instructons
Base Controls Operation and Test
IMPORTANT: Be sure the area above the machine is clear of obstructions to allow full elevation of
platform.
ART_3236
ART_2506 R2
ART_3237
Page 16
Select BASE Operation
• Turn the selector switch to BASE.
Emergency Stop
• Press the EMERGENCY STOP switch at any time to stop all machine
functions.
• Turn switch clockwise to reset.
Do not elevate the platform if the machine is not on a firm level surface�����
Elevate Platform
• Press and hold the RAISE button on the base control panel to elevate the
platform.
Test Operation
• Elevate to maximum height.
• Releasing the button will stop elevation.
• Pressing the EMERGENCY STOP switch will stop elevation.
Lower Platform
• Press the LOWER button. Release when the desired platform height is
reached.
Test Operation
• Lower the platform.
• Releasing the button will stop descent.
• Pressing the EMERGENCY STOP switch will stop descent.
84RT Seres Speed Level™ - Operator's Manual
July 2021