Fall And CollSOn Hazards - Mec Speed Level 84RT Series Operator's Manual

Secton 4 - Hazards
Fall Hazards
ART_3067
ART_3058
Collision Hazards
ART_3072
ART_3062
ART_3066
Page 9
Fall and Collision Hazards
DO NOT sit, stand or climb on the platform guard rails. Maintain a firm footing
on the platform floor at all times.
DO NOT exit the platform when elevated
DO NOT climb down from the platform when elevated.
Keep the platform floor clear of debris.
DO NOT fasten a fall restraint lanyard to an adjacent structure.
Ensure that the entry is properly closed before operating the machine.
Operators must comply with employer, job site and governmental rules
regarding the use of personal protective equipment.
Be aware of blind spots while operating this machine.
Watch for overhead obstructions when elevating the platform.
Watch for crushing hazards when holding the platform rail.
Reduce travel speed when moving the machine on slopes, when near
personnel and obstacles, or when surface conditions are wet, slippery or
otherwise limiting.
DO NOT operate in the path of any crane unless the controls of the crane have
been locked out and/or precautions have been taken to prevent any possible
collision.
Stunt driving and horseplay are PROHIBITED.
84RT Seres Speed Level™ - Operator's Manual
July 2021