Table of Contents
Advertisement
Toner Near-end and End Detection
The machine monitors the length of time the main motor
has been running.
When this count exceeds a limit, toner near-end occurs.
Warning messages are only displayed if meter charge
mode is enabled, if SP 5930 003 is also set to 'yes'.
After this, when the main motor rotation count has
increased by enough for an additional 200 pages (A4 at 2
pages per job), toner end occurs and printing stops.
If there is a high coverage ratio, the toner may run out
before 200 pages.
Because of this, the print quality of the final 200 pages is
not guaranteed.
No additional notes.
Main Motor Rotation Time
87
M080 Training - Sincere-P3
Advertisement
Table of Contents
