QSU reduces the operating temperature, because
of these improvements in fusing unit technology
Reduced thickness of the hot roller (5mm=>3mm)
Low melting-point toner (165C => 155C)
This also means that the warm-up time and
recovery time from energy saver modes are also
reduced.
Warm-up time (5min=>3min)
Recovery time (30sec =>10sec)
Through major reductions in warm-up time and recovery time from energy saver
modes (Low power, Off/Sleep), QSU (Quick Start Up) Technology has
eliminated the traditional trade-off between energy saving and convenience of
speed.
The IH (induction heating) method used in the Apollon series is also a part of this
technology.
Quick Start-up
159
M080 Training - Sincere-P3