Ricoh S-P3 Manual page 161

2.2 Overview – 2 (System Settings)
Power
Consumption
Plug In
1) Timer settings and recovery time (System settings => Timer setting)
Mode
Auto Off Mode
"Auto Off" mode settings can be adjustable with User Mode (Menu > System > Auto
Off).
Auto Off Mode On/Off
You can specify whether or not to use Auto Off Mode.
On (Default)
Off
Auto Off Timer
Specify time for entering the Auto Off mode.
1 minute (Default)
5 minutes
15 minutes
30 minutes
45 minutes
60 minutes
We recommend that the default settings should be kept.
If the customer requests that the setting should be changed, please explain that
their energy costs could increase, and that they should consider the effects on the
environment of extra energy use.
If it is necessary to change the setting, please try to make sure that the Auto Off
timer is not too long. Try with a shorter setting first, such as 5 minutes, then go to a
longer one (such as 30 minutes) if the customer is not satisfied.
If the time is set to the maximum value, the machine will not begin saving energy
until 60 minutes has expired after the last job. This means that after the customer
has finished using the machine for the day, energy will be consumed that could
otherwise be saved.
If you change the settings, the energy consumed can be measured using SP8941,
as explained later in this presentation.
Power consumption during warm-up may be much higher than shown in this diagram.
2. Energy Saving
Warm-up Operation Mode
Ready Mode
Off Mode
Auto Off Timer
Timer Starts
1 – 60 min
Timer Default
Auto Off Timer 1 minute
161
M080 Training - Sincere-P3
Time
Setting options Recovery time
1 minute 12 seconds
5 minutes
15 minutes
30 minutes
45 minutes
60 minutes