Table of Contents
Advertisement
If PM is Done by a Technician - 2/2
How does the technician know when to do PM?
The technician must find the current value of the
counter. To do this, speak to the user.
The user then pushes the Menu key and reads
the value on the display over the telephone.
» If meter-charge mode is set to 'yes', the counter is the
» If meter charge mode is set to 'no', this counter is not
If the counter is 90k or more, it is time for PM.
No additional notes.
first item on the display after the user pushes the Menu
key.
displayed when the Menu key is pressed.
60
M080 Training - Sincere-P3
Advertisement
Table of Contents
